CAME V6000P User Manual

Page 19 - Manual FA01799 -EN - 04/2022 - © Came S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Preparing for programming
Manually hook up the door to the skid.
Power up the operator. After emitting a sound signal, the
control board is ready for programming.
Remove the transparent panel to access the programming
keys.
⚠ Memorizing (function 5) must always be the last phase of programming, otherwise the settings will
not be saved.
In the case of errors, cut off and the power up again the mains power and reprogram.
PROGRAMMING DEVICE
Description of keys
Menu adjusting and browsing
key
Menu adjusting
and browsing key
Save button
transmitters
Menu access and save changes
key
Display for programming and monitoring the
operator's operation
L = normal
operation
F = obstacle
detection
H = Encoder error
A = Active
photocell
Legend of symbols
⚠ Some functions must be set so that the operator can work, others, on the other hand, are optional
Page 19 - Manual FA01799 -EN - 04/2022 - © Came S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Original instructions

CAME V6000P Specifications

General

Brand	CAME
Model	V6000P
Category	Garage Door Opener
Language	English