CAME ZL65 - Remove user; Remove all; Radio decoding; Motor type

Page 25 - Manual FA01359-EN - 03/2021 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
Remove user
Remove one of the registered users.
U2 Remove user OFF (Default)
ON
Use the arrows to choose the number
associated with the user you want to
remove.
No. 1 > 250
Alternatively, the control device
associated with the user you want to
remove can be activated.
Press ENTER to confi rm.
“CLr” will appear to confi rm deletion.
Remove all
Remove all registered users.
U3 Remove all OFF (Default)
ON
Radio decoding
Choose the type of radio coding for the transmitters enabled to control the operator.
If you choose the type of radio coding for the transmitters [Rolling code] or [TW key block], any transmitters with
a di erent type of radio coding saved previously will be deleted.
U4 Radio decoding 1 = All decoding (default)
2 = Rolling code
3 = TW key block
Motor type
Set the type of gearmotor installed on M1 and M2.
A1 Motor type 1 = AXI - F500
2 = FAST70
3 = FTX
4 = ATS
For F500 gearmotors, set
function [F11] to OFF.