CAME ZLJ14 - Safety Devices

L
L
L
L
L
L
L
L
10 11 TS E ES 1 2 3 3P 4 5 7 CX CY CZL N
L
L
L
L
Delta
DFWN
Dir/DeltaS
DFI+DFWN
p. 11 - Manual FA01082-EN - 02/2018 - © CAME S.p.A. - Translation of the original instructions
Connecting photocells for Safety-test function - See [FUNCTIONS] menu  [Safety Test] for enabling the function
and selecting which and how many photocells will be commanded by it.
& If unused, contacts CX, CY and CZ should be disabled during programming.
Sensitive safety-edges connections (N.C. contact) - See [FUNCTIONS] menu  [input CX], [input CY] or [input CZ] for
associating an operating mode to each input.
& If unused, contacts CX, CY and CZ should be disabled during programming.
Photocells connections (N.C. contact) - See [FUNCTIONS] menu  [input CX], [input CY] or [input CZ] for associating
an operating mode to each input.
& If unused, contacts CX, CY and CZ should be disabled during programming.
Safety devices