CAME ZLJ14 - Programming; Programming Commands Description

p. 13 - Manual FA01082-EN - 02/2018 - © CAME S.p.A. - Translation of the original instructions
to exit the menu wait 30
seconds, or press , until the
initial screen is displayed.
To raise or lower values, use the /
arrows and confirm with
also for the sub-menus, move using
the / arrows and confirm with
To select a menu item, move using
the / arrows and confirm with To enter the menu, keep pressed
for at least one second.
Description of programming commands
PROGRAMMING
These symbols / , show
the active line that can be
browsed and/or edited. ,
The key is for:
- entering menus;
- confirming or memorizing set values.
The key is for:
- exiting menus;
- cancelling changes.
The keys / are for:
- moving from one item to another;
- increasing or decreasing values.