Canon 40D - EOS 40D DSLR - Adjusting While Comparing with the Original Image; Changing How the Window Is Split; Advanced Image Editing and Printing

42
1
2
3
4
5
Introduction
Contents at
a Glance
Basic
Operation
Advanced
Operation
Advanced
Image Editing
and Printing
Editing JPEG
Images
Index
Processing
Large Numbers
of Images
Reference
Adjusting While Comparing with the Original Image
You can display before and after versions of an adjusted image in the
same window and adjust while checking the adjustment results.
1
In the edit window, select the [View] menu  [Before/
after comparison].
¿ The image divides into a left and right window.
O The window on the right shows the image after editing.
2
Change the image display.
O Select the [View] menu  [Change up/down/left/right].
¿ The arrangement of the two images changes to top and bottom.
O The bottom window shows the image after editing.
Images can also be displayed in the edit image window by the same
operation.
You can change the display of the image to a single image split in two.
1
Select the [Digital Photo Professional] menu 
[Preferences].
2
Select the [View settings] tab sheet.
3
Select [Split single image and show] from [Before/
after comparison] and click the [OK] button.
¿ One image is divided and displayed on the left and right or top
and bottom.
O To switch between top and bottom, and left and right, perform the
same operation as step 2 on the left page.
Changing How the Window is Split