Menu Settings
108
System settings
Customize projector and remote control operation, beeping, and other
details after startup, during standby, and in other situations.
(When the input signal is HDMI-1)
Menu
Function Details
User screen settings
Customize user screens shown at startup, when no
signal is detected, and in other situations.
P109
On screen
Set the display position and whether to show or hide
menus, help information, and warning or caution icons.
P110
Remote control/Side
control
Specify operation with remote control or projector
buttons.
P112
Audio in terminal select Select the terminal for audio input. P113
Serial communication Display serial communication setting values. P114
Power management
mode
You can specify to turn off the lamp or projector
automatically after a certain period if the projector and
remote control are not used and there is no input
signal.
P114
Power management
duration
Specify how long before the lamp is turned off or the
projector enters standby, depending on the [Power
management mode] setting.
P114
Direct power on
You can turn on the projector by connecting the power
cable without pressing the POWER button.
P115
Motion blur reduction
Motion blur is blurring that occurs during video
playback. Motion blur reduction can make this blurring
less noticeable.
P115
Language
You can select the language in which the menus are
displayed.
P116
Other settings
Set a password, reset counters for lamp or air filter
replacement, and access other settings and
information.
P117
To Next Page
Loading...
Need help?
General
