Canon 600EX-RT - A: Fully Automatic Wireless Flash Shooting

81
This section describes basic fully
automatic wireless shooting when using
a 600EX-RT/600EX attached to the
camera (master) and a 600EX-RT/
600EX wirelessly controlled (slave).
1
Set the master unit.
Set the 600EX-RT/600EX attached to
the camera as the master unit (p.78).
You can also use a camera equipped
with a master function or a Speedlite
Transmitter ST-E2 (sold separately)
as the master unit.
2
Set the slave unit.
Set the 600EX-RT/600EX to be
controlled wirelessly as the slave unit
(p.78).
You can also use other EX Speedlites
that are equipped with a slave
function.
A, B or C can be set as the firing
group.
a : Fully Automatic Wireless Flash Shooting
Autoflash Shooting Using One Slave Unit
COPY