Canon image RUNNER 3245 - Page 55

Communication Environment Setup
4-13
4
Settings Common to the Network Protocols
If you want to specify a Community Name 1
Press [Community Name 1 Settings] → [On] → specify the settings for <MIB Access Permission>
and the community name in [Community Name].
You can also change the community name in [Community Name] to a name other than 'public'.
If you want to specify a Community Name 2
Press [Community Name 2 Settings] → [On] → specify the settings for <MIB Access Permission>
and the community name in [Community Name].
You can also change the community name in [Community Name] to a name other than 'public2'.
2 Specify the settings for SNMP v. 3.
[On] for <Use SNMP v. 3>: Specify the user and context according to the following procedures.
●
☐
●
☐