9-8
Troubleshooting
Clearing Jams
10
Insert the toner cartridge so that the
protrusion on the right side of the toner
cartridge (A) fits into the guide (B) located
on the right side of the machine and slide
it down parallel to the guide.
11
Push down the toner cartridge to make
sure it is properly set in the machine.
12
Hold the grip (A) on the right front side of
the toner cover.
13
Close the toner cover.
14
Lower the scanning platform.
Be careful not to get your fingers caught.
If you cannot close the toner cover, do not force
it to close. Open the cover and make sure the
toner cartridge is properly set in the machine.
–
–
15
Remove the dust cover from the paper
cassette.
To Next Page
Loading...
