Canon imageRUNNER ADVANCE 525 I User Manual

COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > DBG-LOG
DEFAULT 2 Reset of debug log setting
Detail To clear all debug log settings and return to the state before debug log collection operation.
Use Case
- When returning the device in which analyzing the cause of a problem was completed
- When resetting the debug log settings
Adj/Set/Operate Method
Select the item, and then press OK key.
LOG-DEL 2 Clearing of debug logs
Detail To delete the debug log file.
The debug log setting is not reset.
Use Case
When clearing the debug log
Adj/Set/Operate Method
Select the item, and then press OK key.
HIT-STS2 2 For R&D
OPTION (Specification setting mode)
■ FNC-SW
COPIER (Service mode for printer) > OPTION (Specification setting mode) > FNC-SW
MODEL-SZ 1 Fixed magnifictn & DADF orgnl dtct size
Detail To set the fixed magnification ratio display and the original detection size with DADF.
It is set automatically at the time of installation of the Reader according to the location.
Use Case
Upon user's request
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 3
0: AB configuration (6R5E) for Japan, 1: Inch configuration (5R4E) for North/Middle/South
America, 2: A configuration (3R3E) for Europe, 3: AB/Inch configuration (6R5E) for Asia, Oceania,
South America
Default Value
It differs according to the location.
SCANSLCT 2 ON/OFF of scan area calculate function
Detail To set ON/OFF of the function to calculate scanning area from the specified paper size.
When the paper size is larger than the original size, selecting ON reduces productivity because
the scanning area gets larger.
Use Case
When matching the scanning area with the paper size
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: OFF (calculated from the detected original size)
1: ON (calculated from the specified paper size)
Default Value
0
8. Service Mode
446

Canon imageRUNNER ADVANCE 525 I Specifications

General

Brand	Canon
Model	imageRUNNER ADVANCE 525 I
Category	Printer
Language	English