FAX (Serivce Mode for FAX)
Overview
â– Configuration of the Service Mode
Service mode is divided into the following 10 items (#1 to #10).
Item Name Description
#1 SSSW Service software
switch
This can be used to conduct the registration/settings relating to basic functions of the fax,
such as error management, echo prevention and prevention of communication problems.
#2 MENU Menu switch setting This can be used to conduct the registration/settings relating to the required functions at
installation, such as NL equalizer, transmission level.
#3 NUMERIC Par-
am.
Setting of numeric pa-
rameters
This can be used to enter numeric parameters.
#4 NCU (Adjustment by a
service technician is
not possible.)
The values of this item are collectively set based on the setting of #5 TYPE.
#5 TYPE Country setting If the item "STANDARD" displayed on the display is set, #4 NCU data is collectively set to
comply with the communication standards in Japan.
#6 IPFAX Communication set-
tings of IPFAX
If the license option for IPFAX has been enabled, IPFAX is displayed.
#7 PRINT Printer function set-
ting
This can be used to conduct the registration/settings relating to the printer basic service
functions, such as size reduction conditions for received images.
#8 CLEAR Data initialization
mode setting
This item is to initialize each data.
#9 TEST Test Mode To execute various tests.
#10 REPORT Service Report To execute report print.
CAUTION:
If a 2nd line fax option is installed, IPFAX cannot be used.
â– Operation method
1. Enter service mode.
8. Service Mode
554
To Next Page
Loading...
Need help?
General