23
2 times +2 pitches
3 times +3 pitches
4 times -1 pitch
5 times -2 pitches
6 times -3 pitches
7 times or more
Return to the service mode menu selection (no
writing to the EEPROM)
After the value is set, the machine returns to the parameter mode selection. Repeat steps 2) and 3)
to adjust the left margin in each parameter mode: "back side of paper fed from the rear tray," "front
side of paper fed from the cassette," and "back side of paper fed from the cassette."
4) After the left margin correction in all the parameter modes is completed, press the Resume/Cancel
button 4 times or more in the parameter mode selection, then press the Power button to return to
the service mode menu selection.
To Next Page
Loading...
