6
Using both hands, rotate the Roll Holder toward the back to
rewind the roll.
7
Holding the Roll Holder flange (a), remove the holder from
the Roll Holder Slot.
Note
• For instructions on removing the Roll Holder from rolls, see "Removing the Roll Holder from Rolls." ➔ P.383
8
Holding it at the positions indicated, close the Roll Cover.
Note
• To load new roll paper in the printer at this point, see "Loading Rolls in the Printer." ➔ P.375
Removing the Roll from the Printer
iPF685
User's Guide
Handling and Use of Paper Handling rolls
382
To Next Page
Loading...
