Canon iPF780 Series - Page 34

Chapter 1
1-24
First Level Second Level Third Level Fourth Level Fifth Level Sixth Level
[GL2 Settings] [Quality Manager] [Color Mode] [Monochrome]
[Color (CAD) 1]*
[Color (CAD) 2]
[Color (CAD) 3]
[Color (CAD) 4]
[Color (CAD) 5]
[Print Quality] [Draft]
[Standard]*
[High]
[Input Resolution] [600dpi]*
[300dpi]
[Print (Economy)] [Off]*
[On]
[Paper Manager] [Paper Source] [Automatic]*
[Roll Paper]
[Cut Sheet]
[Margin] [3mm(Standard)]*
[5mm]
[Oversize] [Off]
[On]*
[Conserve Paper] [Off]*
[On]
[Auto Rotate] [Off]*
[On]
[Enlarge/Reduce] [Off]*
[Specify scaling]
[Fit to paper]
[Print centered] [Off]*
[On]
[Standard cut] [Off]*
[On]
[Nesting]*14 [Use Nesting] [Off]*
[On]
[Nesting WaitTime]*7 [xx min.]
[Cut Lines]*7 [Off]*
[On]