4-34
Paper Loading and Output Tray
Loading Paper in the Multi-purpose Tray
4
When printing from DOS, UNIX, or other operating system on which the printer driver
cannot be used, specify the following settings in addition to TRAY PAPER SIZE.
The FEEDER MENU options in the SETUP menu
• STD PAPER SIZE = the size of the loaded paper (See p. 6-16)
• STD PAPER TYPE = the type of the loaded paper (See p. 6-19)
■ Specifying the Paper Settings in the Printer Driver (See Driver Guide)
When printing from the printer driver, specify the following settings. For more details on
using the printer driver, see Help of the printer driver.
[Page Setup] Sheet
[Output Size] = the size of the loaded paper
[Paper Source] Sheet
[Paper Source] = [Multi-Purpose Tray]
[Paper Type] = [Plain Paper]: Plain Paper (60 - 89 g/m
2
)
[Plain Paper L]: Specify when paper curls excessively on printing
with [Plain Paper] selected.
[Heavy Paper 1]: Heavy Paper (90 - 120 g/m
2
)
[Heavy Paper 2]: Heavy Paper (121 - 163 g/m
2
)
[Heavy Paper 3]: Specify when you want to improve the toner fixation
on printing with [Paper Type] set to [Heavy Paper 2].
[Transparency]: Transparencies
[Label]: Labels
[Envelope]: Envelopes
To Next Page
Loading...
