Canon LBP 3370 - Tcp;Ip Settings; Network Menu

6-29
Printing Environment Settings
6
SETUP Menu Settings
NETWORK MENU
■ TCP/IP SETTINGS
IP V. 4 SETTING
IP MODE.............................MANUAL*, AUTO
PROTOCOL*
1
DHCP................................OFF*, ON
BOOTP .............................OFF*, ON
RARP................................OFF*, ON
IP SETTINGS
IP ADDRESS ....................0.0.0.0*
SUBNET MASK ................0.0.0.0*
GATEWAY ADDRESS ......0.0.0.0*
IP ADD.RANGE
REJECT RX/PRT..............OFF*, ON
REJECT ADD.SET.*
2
........REJ IP 1 to 8
PERMIT RX/PRT ..............OFF*, ON
PERMIT ADD.SET.*
2
........PER IP 1 to 8
REJ SET/BROWSE ..........OFF*, ON
REJECT ADD.SET.*
2
........REJ IP 1 to 8
PMT SET/BROWSE .........OFF*, ON
PERMIT ADD.SET.*
2
........PER IP 1 to 8
DNS
PRIMARY ADD. ................0.0.0.0*
SECONDARY ADD. ..........0.0.0.0*
IP V. 6 SETTING
IP V. 6..................................OFF*, ON
WINS ....................................OFF*, ON
ARP/PING.............................ON*, OFF
FTP
FTP PRINT .........................ON*, OFF
FTP SETTINGS ..................ON*, OFF
LPD PRINT ...........................ON*, OFF
RAW PRINT..........................ON*, OFF
WSD
WSD PRINT........................ON*, OFF
WSD BROWSING*
3
............ON*, OFF
MULTICAST DISC. .............ON*, OFF
HTTP ....................................ON*, OFF
RESPONSE..........................ON*, OFF
MAC ADDRESS SET
PERMIT RECEIVE .............OFF*, ON
PERMIT ADD.SET.*
2
..........PER.MAC ADD.1 to 50
*1 PROTOCOL is displayed only when IP MODE is set to AUTO.
*2 REJECT ADD.SET. and PERMIT ADD.SET. are displayed only when REJECT RX/PRT, PERMIT RX/
PRT, REJ SET/BROWSE, PMT SET/BROWSE, or PERMIT RECEIVE is set to ON.