6-15
Printing Environment Settings
6
SETUP Menu Settings
CASSETTE1 SIZE
A4*, LTR, LGL, EXEC, MIXED SIZES, CUSTOM SIZE, CUSTOM SIZE R, A5, B5
Specifies the size of the paper loaded in the paper cassette in the printer unit
(Cassette 1).
IMPORTANT
•
When you change the paper loaded in the paper cassette frequently, it is
convenient if you set CASSETTE1 SIZE to MIXED SIZES. When CASSETTE1
SIZE is set to MIXED SIZES, you do not need to specify the settings for
CASSETTE1 SIZE each time the different size paper is loaded. However, when
specifying MIXED SIZES, make sure that the size of the loaded paper matches the
paper size specified in the printer driver before printing. If they do not match, the
printer may stop printing, displaying the message <41 CHK PAPER SZE>, or a
paper jam may occur. Be sure to check if the paper size specified in the printer
driver matches the size of the paper loaded in the paper cassette before using the
printer.
•
When printing custom size paper from UFR II Printer Driver, you can load the paper
either in portrait or landscape orientation. However, if you want to print custom size
paper of its long edges 215.9 mm or less when CASSETTE1 SIZE is set to MIXED
SIZES, load the paper in landscape orientation. When you are not printing from
UFR II Printer Driver, load the paper in portrait orientation.
NOTE
•
Select CUSTOM SIZE or CUSTOM SIZE R when you want to specify custom size
paper using application and print it. If a message that prompts you to change the
size of the paper appears during printing, press the (Online) key to clear the
error before printing again.
•
You can obtain the same result by specifying the setting for CASSETTE1 SIZE in
the SELECT FEEDER menu.
To Next Page
Loading...
Need help?
General