Canon LBP 3370 - Page 294

8-35
Tr oubleshooting
8
Message List
<FM SCALE ERROR> <Auto Error Skip>
Cause There is a character in which the number of coordinate points on the
contour lines exceeds the limitation of a pseudo-scalable font.
Remedy Perform "Error Skip", then continue printing. However, the characters with which
an error has occurred are not printed properly.
<PC LOAD "size">
Cause The paper of the size specified in the application is not loaded in the
paper cassette or multi-purpose tray, or the paper source for the different
paper size is selected.
Remedy 1 Load the paper of the size selected in the application (or the one specified by
scaling factors). (See "Loading Paper in the Paper Cassette," on p. 4-17)
Remedy 2 If you are using the multi-purpose tray, check TRAY PAPER SIZE, and when the
paper size does not match the size specified in the application, specify the
setting properly. (See "Loading Paper in the Multi-purpose Tray," on p. 4-33)
Remedy 3 Press the (Feeder Selection) key, then select the paper cassette in which the
paper of the matched size is loaded. (See "Selecting a Paper Source," on p.
4-11)
Remedy 4 Press the (Online) key, then print to the currently loaded paper forcibly. If
you are using the multi-purpose tray, the setting for TRAY PAPER SIZE
automatically changes to the setting specified in the application.
IMPORTANT
If you open the front cover when the message <PC LOAD "size"> is displayed, the
message may disappear. However, be sure to follow the directions in the displayed
message to change the paper.