EasyManua.ls Logo

Canon LBP 3370 - Page 306

Canon LBP 3370
362 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8-47
Tr oubleshooting
8
When You Cannot Obtain Appropriate Printout Results
Remedy 2 Select the [Manual Scaling] check box in the printer driver, then specify an
appropriate scale factor according to the paper size to be used.
In order to specify the setting for [Manual Scaling], display the [Page Setup]
sheet.
Cause 2 The position of the paper is incorrect.
Remedy Load the paper properly. (See "Loading Standard Size Paper," on p. 4-20,
"Loading Paper (Other than Envelopes)," on p. 4-35)
Cause 3 A document with no margins was printed.
Remedy Secure a margin around the data so that it fits within Printable Area (See p.
4-6), then print again.
The paper is printed completely black.
Cause The drum in the toner cartridge has deteriorated.
Remedy Replace the toner cartridge with a new one. (See "Replacing the Toner
Cartridge," on p. 7-2)
Vertical streaks appear on the printed paper.
Cause 1 The toner cartridge was replaced, or the printer has not printed for a long
period of time.
Remedy Set [Special Print Adjustment B] to [Mode 1] in the printer driver.
If the problem is not solved by specifying [Mode 1], specify [Mode 2].
If the problem is not solved by specifying [Mode 2], specify [Mode 3].
In order to specify the setting for [Special Print Adjustment B], display the
following dialog box.
-For UFR II Printer Driver: Display the [Advanced Settings] dialog box by
clicking [Finishing Details] in the [Finishing] sheet, then clicking [Advanced
Settings] in the [Finishing Details] dialog box.
-For PCL Printer Driver: Display the [Finishing Details] dialog box by clicking
[Finishing Details] in the [Finishing] sheet.
IMPORTANT
Selecting [Off] may also avoid vertical streaks appearing on the printed paper. In
this case, specify [Off].
If [Special Print Adjustment B] is specified, printing speed may drop.
Cause 2 Depending on the paper type or the operating environment, vertical
streaks may appear on the printed paper.
Remedy 1 Replace the paper with new paper in an unopened package. (See "Paper
Requirements," on p. 4-2)

Table of Contents

Related product manuals