Canon LBP 3370 - Page 359

Index
10-40
Appendix
10
Q
QUALITY CHANGE, 6-26
QUALITY MENU Options, 6-3
R
Rating Label, 1-7
Ready Indicator, 1-9
RECVRY PRINTING, 6-38
REMOTE UI SET., 6-35
REPORTLOG LST, 6-50
Reset Key, 1-9, 5-6
RESET Menu, 5-13, 6-9
Rubber Pads, 4-12
S
Scalable Fonts (PCL), 10-6
SELECT FEEDER Menu, 5-15, 6-10
Serial No. Label, 1-8
Service Call Display, 8-36
Setting Items, 6-2
Setting Priority, 5-3
Settings Key, 1-10, 5-6
SETUP Menu, 5-9, 6-2
SETUP Menu Initialization, 5-17
SHOW WARNINGS (CONTROL MENU), 6-13
SHOW WARNINGS (IMAGING), 6-46
SHUT DOWN, 6-52
Shutting Down the Printer, 3-4
SMB, 6-33
SNMP V. 1, 6-34
SNMP V. 3 SET., 6-34
SOFT RESET, 6-51
Soft Reset, 3-18
SP.PRINT ADJ A, 6-39
Specifications, 10-31
Controller, 10-33
Hardware, 10-31
Software, 10-34
START WAIT TIME, 6-35
STD PAPER SIZE, 4-18, 4-34, 6-16
STD PAPER TYPE, 4-18, 4-34, 6-19
Storing Printouts, 4-9
SUBSTITUTE SIZE, 6-39
SYMBOL SET, 6-42
Symbol Sets Supported, 10-8
T
TCP/IP SETTINGS, 6-29
Temperature/Humidity Conditions, 2-3
Toner Cartridge
Before Replacing, 7-3
Handling, 7-14
Replacement, 7-2, 7-8
Storage, 7-16
Toner Cartridge Guide, 1-8
TONER SAVE, 6-25
Transparencies, 4-4
Transport Guide, 1-8
Tray Extension, 1-7
TRAY PAPER SIZE, 4-33, 6-14, 6-54
TRAY PRIORITY, 6-17
TX/RX Indicator, 1-8
Typeface Samples, 10-6
U
UFR II SETUP Options, 6-8
UNIT OF MEASURE, 6-42
UPDATE FIRMWARE, 6-39
USB, 2-30
USB Connector, 1-8
USER MAIN. Options, 6-7
User Manual CD-ROM Menu, 1-4
Utility Key, 1-9, 5-6
UTILITY Menu, 5-11, 6-9
V
Ventilation Slots, 1-7, 1-8