Troubleshooting
6
96 97
Message
Explanation
Response
●A033 Invalid file detected during picture index restoration (info)
broken file detected: %1
A file was detected during picture index restoration that is not a recorded picture.
Delete any invalid files. This does not affect picture index restoration processing.
%1
File name
Message
Explanation
Response
●A034 Recorded picture file read error during picture index restoration (info)
picture file I/O error: %1
An error occurred while a recorded picture file was being read during picture index restoration processing.
Check the contents of the file. This file is not included in the picture index.
%1
File name
Message
Explanation
Response
●H011 File specification error (notice)
HTTPD: File does not exist: %1
The specified file was not found.
Check the URL and file. (If the URL is "/opt/..." the file is on a memory card in "/card/htdocs/...).
If the URL is not "/opt/...", the file is on the internal file system in "/htdocs/...".)
If there is no error, the file system must be repaired.
%1
File name
Message
Explanation
●P001 File system mounting failure (warning)
AUTOMNT: %1 already mounted or %2 busy
Two memory cards are inserted together or the memory card cannot be mounted
because an error occurred when it was last unmounted.
%1
Device name
%2
Mount point
Response
If the card cannot be mounted because an error occurred when it was last unmounted, reboot.
Message
Explanation
●P002 Mount number exceeded (err)
AUTOMNT: mount table full
The mount entry table is full.
This can occur when unmount errors are repeated.
Response
Reboot.
Message
Explanation
●P003 Memory card error (warning)
AUTOMNT: cannot mount %1 on %2
Mount processing was cancelled due to a memory card error.
%1
Device name
%2
Mount point
Response
Replace the memory card.
Message
Explanation
●P004 Device busy (err)
AUTOMNT: %1: device is busy
The card was unmounted during file access. This does not occur during normal operation.
%1
Device name
Response
If this occurred when administration tools were used to unmount the card, reboot.
Message
Explanation
●P005 Card initialization failed in card slot A (warning)
ENABLER:slota enable err
Card information read from the card inserted in card slot A failed.
Response
Re-insert the card or replace the card.
Message
Explanation
●P006 Card initialization failed in card slot B (warning)
ENABLER:slotb enable err
Card information read from the card inserted in PCMCIA slot B failed.
Response
Re-insert the card or replace the card.
Message
%1
●P009 Memory card read error (err)
PCMCIA ATA Card(Slot%1 sector %2): Read Sector Error
Slot (A|B)
%2
Sector number
Explanation
A sector read error occurred. The card may be damaged.
Response
Check the memory card and, if necessary, reformat the card.
If there is a physical fault on the card, replace the card.
Message
%1
●P010 Memory card write error (err)
PCMCIA ATA Card(Slot%1 sector %2): Write Sector Error
Slot (A|B)
%2
Sector number
Explanation
A sector write error occurred. The card may be damaged.
Response
Check the memory card and, if necessary, reformat the card.
If there is a physical fault on the card, replace the card.
HTTP Server Log Messages
Card Slot-related Log Messages
Log Messages Log Messages
To Next Page
Loading...
