Canon VB101 - Factory Default Setting

Appendix
110 111
Factory Default Setting
Item
Setting
●Administrator ID root
●Administrator password VB101
●Settings page path admin
●Device name None
●Date and time
Offset from GMT 9
●Ethernet
Address setting method
Give Bootp option priority when
Subnet Mask is decided.
Give Bootp option priority when
Gateway Address is decided.
IP address
Subnet mask
Use
Auto Setting
Check
No check
192.168.100.1
255.255.255.0
●PPP
PPP local address
PPP remote address
PPP account list
Maximum modem speed
No use
192.168.101.1
192.168.101.2
None
57600
●Gateway
Network interface
Gateway address
None
Empty
●Video input
Main camera
(following settings common to 1, 2, 3 and 4)
Video signal
Video Capture size
Video Quality
Camera 1
Auto Detect
320 x 240
50
●Camera control
Camera control port 1
Baud rate
Wide converter
Camera control port 2
Baud rate
Wide converter
Camera 1
9600
Not Used
Camera 2
9600
Not Used
●Home position
Pan
Tilt
Zoom
Brightness
Shutter speed
Focus mode
Visibility range restrictions
Upper/Lower value
Left/Right value
Telephoto/Wide
None
None
None
Standard
Auto
Auto
None
None
None
Item Setting 1 ( (y) (m) (d))
Item setting 2 ( (y) (m) (d))
Item
Setting
●Preset None
●Access Authorization None
●Image recording No
●Application settings
WebView Livescope
Video Transmission Port
Camera Control Port
Max Clients
Control Queue Length
Max Frame rate (fps)
Max View Time (sec)
Max Camera Control Time (sec)
Still Video Capture Delay
Waiting (ms)
Service time restriction
VIEW-Windows 1.2.1
Video Transmission Port
Camera Control Port
Switcher Control Port
Max Clients
Max Frame rate (fps)
Selected
65310
65311
20
20
30.0
0
20
1500
None
Not selected
5111
5110
5120
10
30.0
●Miscellaneous Settings
HTTP Port
Maximum Clients
Maximum Idling Time (sec)
Name Server Address (1)
Name Server Address (2)
Name Server Address (3)
Mail Server Host
Sender's (From) Mail Address
Recipient Mail Address
Syslog Server Host
Max Log File Number
Max Log File Size
(Kbytes)
Log mail collection time
Response to Error
Response to Warning
Response to Information
80
40
10
None
None
None
None
None
None
None
10
64
10
No checks
No checks
No checks
Item setting 1 ( (y) (m) (d)) Item setting 2 ( (y) (m) (d))
Factory Default Setting