OPERATOR MANUAL |CAPTAIN 273 4WD 24
WARNING: Liquid cooling systems build up ' pressure as the engine gets hot. Before removing the
radiator cap, stop the engine and let the system cool.
Check the engine cooling system and add coolant as required. (Fig. 2-6)
2.18 Clean the tractor:
• Keep work surfaces and engine compartments clean.
• Before cleaning the machine, always lower implements to the ground, place transmission in neutral,
engage the parking brake, shut off the engine and remove the key.
• Clean steps, pedals and floor. Remove grease or oil, Brush away dust or mud. In winter, scrape away
snow and ice. Remember-slippery surfaces are dangerous.
• When plastic parts need to be cleaned (such as console, instrument panel, indicators etc.), do not
use petrol, paraffin, diluents etc.
• They could cause discoloration, cracking or warping of the cleaned parts.
• These parts should ONLY be cleaned with water, neutral soap and a soft cloth.
• Remove and store implements, keys, hitches etc. in their proper places.
2.19 Protect the environment:
It is illegal to pollute drains, water courses or soil. Use authorized waste disposal facilities, including civic
amenity sites and garages providing facilities for disposal of used oil. If in doubt, contact your local
authority for advice. To get to know the correct methods to dispose of oils, filters, tyres etc. contact your
Dealer or the local agency for waste recycling.
2.20 Only for North America:
The safety sheets of each material give information on chemicals contained in a product, procedures to
use it safely, first-aid and procedure to be followed in case of leakage or spills. In all North America such
safety sheets are available at the Dealer's.
Before any maintenance on the machine refer to the above mentioned safety sheets for fluids, oils etc.
used in this machine. The sheets inform about risks and safe maintenance procedures. We strongly
recommended following these indications during any maintenance operations.
To Next Page
Loading...
