OPERATOR MANUAL |CAPTAIN 273 4WD 78
5.20 How to open the bonnet
1. Rotate the key (2) Clockwise to unlock the bonnet lock.
2. The bonnet (1) can be easily tilted back for maintenance operations
on the engine.
3. Bonnet top moves upward direction.
4. Now we can access every external pasts of engine.
5.21 VARIABLE MAINTENANCE
WARNING: Use your own discretion and experience when deciding the actual timing for
variable interval service and maintenance operations. It is obviously better to carry out these
operations too often than not often
5.22 OPERATION 1
Engine oil level fig.5-3
Leave the tractor parked on a flat surface for at least five
minutes before checking the level, to allow the oil to settle
in the sump:
-take out the DIPSTIC, wipe it with a rag and then dip it
into sump again, then remove the dipstick again and or
sure that the oil level is within the H/L mask reaches and
does not exceed the level marked on it.
If necessary, add recommenced engine oil through the
filter until the required level has been reached.
CAUTION: Never ever use the engine with
the oil level below the āLāMark.
Fig.5-3 Engine oil Dipstick (LH.S OF Engine)
To Next Page
Loading...
