scala-500
Fig. 3 Fig. 4
•
Once the Clip is inserted and adjusted to your
individual needs, press the Clip's wings to open
the latch. Then attach the entire headset by
sliding the open Clip from front
to
back along
the arm of the Eye/Sunglasses (FIG. 5-6) until
the speaker hovers above your ear canal. Then
push the speaker gently towards the ear canal
to achieve a comfortable fit.
Fig.
5
Fig.
6
•
To
release the headset
from
the eye-glasses,
open the latch by
pressing
the wings (FIG.
7).
Then
pull the headset
upward.
5.4.3 Wearing the headset on the left
or right
You can wear the Headset on the left or the
right side of your head by inserting the pin
accordingly.
5.5 Carry-Sleeve
The Carry-Sleeve can
be
worn with the
enclosed neckband (FIG.
8)
or clipped onto
your belt (FIG.
9).
Fig.
8
NOTE: Fig. 10
The clip attached to the
backside of the Sleeve
(FIG.
10)
swivels for
adjustment. It serves as
a
means to attach to
your belt (vertically or
horizontally) or as a fastener to your shirt, if
the headset is carried as shown in FIG 8.
1
0
1 scala-500 manual