scala-500"
8. FAQs
What is the Cardo scala-500™ headset?
The scala-500'" wireless headset is a
comfortable, stylish and easy to use accessory
to
a
Bluetooth mobile phone or smart-PDA
that enables
you
to hear and speak without
holding your mobile phone near to your ear.
Do I need an Adapter
if
I
already
have a
Bluetooth enabled cell
phone?
No. Your scala-500""
communicates
with
virtually
every
Bluetooth
phone.
How does the scala-500
IM
headset work?
Once the scala-500"'' is "paired" to your
Bluetooth enabled mobile phone, the two
devices communicate wirelessly using
Bluetooth
"*
technology.
If I want to keep my non-Bluetooth mobile
phone, can I still use the scala-500™ with
my mobile phone?
You can
hold on
to your
non-BT mobile
phone
and
still enjoy the benefits
of the
headset, if
you use
the scala-500"' Bluetooth
Adapter (purchased separately). The BT
Adapter plugs directly into the headset
jack
of
most
non-Bluetooth phones, thereby
enabling the phone
to
communicate wirelessly
with your headset.
Is it possible to pair my Bluetooth phone
with more than one headset?
Yes, but not simultaneously. Once your scala-
500"
headset is paired to one phone or BT
Adapter, these two devices remain specifically
connected. If you wish your headset to be
paired to another phone, you need to perform
pairing between the scala-500
'-'
headset and
that phone. Only then will your headset
communicate with that particular mobile
phone.
Is the battery removable?
The battery is not removable and
you
should
never try
to
open the headset.
Let only
Authorized Service Centers maintain or service
your
device. Please refer
to
our website for
instructions when your battery has reached
the end of its useful life.
What if have trouble hearing the other
party?
Try
to
increase volume
by
turning the MFW
accordingly. You may also wish
to
try pushing
the
speaker slightly deeper into your
ear-
canal.
Do I need
to
turn my headset off or leave
it on when it is recharging?
Either
way
is
fine.
When I turn on my cell phone, do Ineed
to
pair or link my cell phone and headset
again?
Once
your
mobile phone and headset are
paired,
you
will
not
have to pair
it
again,
unless an unforeseen error has occurred.
Generally,
you
will only need
to
implement
the simple
steps
of reconnecting your phone
and headset each time either
or both
are
turned off
or
have moved more than
approximately
30
feet
(10
meters) apart from
each other. Please refer
to
section
5.3 for
further details.
Will other Bluetooth phones interfere with
my scala-500™ headset? Can they
eavesdrop?
No. Once you
are paired, your identity
is
known only
to the
mobile phone
you use
and no other Bluetooth phone can hear your
audio signals.
14|scala-500
manual
To Next Page
Loading...
Need help?
General
