Carel heaterSteam - Page 53

53
ENG
“heaterSteam” +0300080EN - rel. 1.0 - 27.04.2016
Variable Variable name Access Description Category
52 NetStatus[1] R Unit 1 status Network
53 NetStatus[2] R Unit 2 status
54 NetStatus[3] R Unit 3 status
55 NetStatus[4] R Unit 4 status
56 NetStatus[5] R Unit 5 status
57 NetStatus[6] R Unit 6 status
58 NetStatus[7] R Unit 7 status
59 NetStatus[8] R Unit 8 status
60 NetStatus[9] R Unit 9 status
61 NetStatus[10] R Unit 10 status
62 NetStatus[11] R Unit 11 status
63 NetStatus[12] R Unit 12 status
64 NetStatus[13] R Unit 13 status
65 NetStatus[14] R Unit 14 status
66 NetStatus[15] R Unit 15 status
67 NetStatus[16] R Unit 16 status
68 NetStatus[17] R Unit 17 status
69 NetStatus[18] R Unit 18 status
70 NetStatus[19] R Unit 19 status
71 NetStatus[20] R Unit 20 status
92 SV_Command RW 1: reset alarms, 2: reset hour counter Comm
93 SV_CommandResult R 1: successful, 2: failed, 3: invalid command
Tab. 11.a
Analog values
Variable Variable name Access Description Category
0 MainPrb R Main probe value (REAL) Inputs
1 LimitPrb R Limit probe/second probe value (REAL)
2 PreheatPrb R NTC preheating probe value (REAL)
3 WirelessPrbVal_1.Hum R Wireless probe 1: Humidity Wireless probes
4 WirelessPrbVal_1.Temp R Wireless probe 1: Temperature
5 WirelessPrbVal_2.Hum R Wireless probe 2: Humidity
6 WirelessPrbVal_2.Temp R Wireless probe 2: Temperature
7 WirelessPrbVal_3.Hum R Wireless probe 3: Humidity
8 WirelessPrbVal_3.Temp R Wireless probe 3: Temperature
9 WirelessPrbVal_4.Hum R Wireless probe 4: Humidity
10 WirelessPrbVal_4.Temp R Wireless probe 4: Temperature
11 SV_PwrReq RW Production request percentage from supervisor Unit status
12 CurrProdPh R Current production in kg/h (lbs/h)
13 ManReq RW Manual request Manual
14 GlbSetP_Hum RW Humidity control set point Regulation
15 GlbSetP_Temp RW Temperature control set point
16 RegulationCfg.Hyst RW Control hysteresis
17 RegulationCfg.Diff RW Control diff erential
18 GlbSetPLim_Hum RW Set point limit for humidity control
19 GlbSetPLim_Temp RW Set point limit for temperature control
20 RegulationCfg.Diff Lim RW Limit diff erential
21 RegulationCfg.MinReq RW Minimum production
22 AlrmThrshHumLo RW Low humidity alarm threshold Alarm threshold
23 AlrmThrshHumHi RW High humidity alarm threshold
24 AlrmThrshHumHiLim RW High humidity limit alarm threshold
25 AlrmThrshTempLo RW Low temperature alarm threshold
26 AlrmThrshTempHi RW High temperature alarm threshold
27 AlrmThrshTempHiLim RW High temperature limit alarm threshold
28 MainPrbCfg.Mi_Hum RW Main probe minimum humidity value IO cfg
29 MainPrbCfg.Ma_Hum RW Main probe maximum humidity value
30 MainPrbCfg.Mi_Temp RW Main probe minimum temperature value
31 MainPrbCfg.Ma_Temp RW Main probe maximum temperature value
32 LimitPrbCfg.Mi_Hum RW Limit probe minimum humidity value
33 LimitPrbCfg.Ma_Hum RW Limit probe maximum humidity value
34 LimitPrbCfg.Mi_Temp RW Limit probe minimum temperature value
35 LimitPrbCfg.Ma_Temp RW Limit probe maximum temperature value
36 RegulationCfg.PwrCorrectionFactor RW Power correction for thermal dissipation Unit cfg
37 SchedDayCfg[0].SetP RW Band 1 set point Scheduler
38 SchedDayCfg[1].SetP RW Band 2 set point
39 SchedDayCfg[2].SetP RW Band 3 set point
40 SchedDayCfg[3].SetP RW Band 4 set point
41 SchedDayCfg[4].SetP RW Band 5 set point
42 SchedDayCfg[5].SetP RW Band 6 set point
43 NetReq R Current system request Network feedback
44 NetProd R Current system production
Tab. 11.i