Manual
20
Flip the cutter module down
according to photo in order to
open the cutter.
(A)
Hold the cutter module and lock it
with the two side screws.
After the screws are locked, flip
close the cutter module.
Firmly close the print mechanism.
Do not cut self-adhesive continuous labels! The remainder of adhesive will pollute the rotary knife
and impair safe operation! The service life of cutter is 500,000 cuts with 160g/m
2
paper weight and
250,000 cuts with 200g/m
2
paper weight.
Max. paper cutting width:116mm
To Next Page
Loading...
