19 62-11648
10. Pretrip
Pretrip is a set of tests run by the system to check unit operation. It is
recommended that a Pretrip is run prior to loading the refrigerated
compartment. It will indicate a failure if one is detected.
1. With the system powered up (START/RUN-OFF switch in the START/
RUN position) press the MENU key until PRETRIP is displayed.
2. Press the PRETRIP soft key to display the PRETRIP MENU screen, which
will display with a 15-second timeout.
3. Use the ▲ or ▼ key to select START PRETRIP, then press the “=” key.
1
2
START/STOP DIESEL
Viewing Menu Soft Key
INTELLISET
PRETRIP
HOUR
METERS
UNIT
DATA
Selections
Press Menu Key to Scroll
To Next Page
Loading...
Need help?
General