15 62-11648
8. IntelliSet™
Products carried or stored in a refrigerated compartment require a
multitude of refrigerant unit settings that must be checked and, if required,
reset each time a new product is loaded. The APX Control System offers
the settings necessary to meet these requirements. IntelliSet is a feature
that allows pre-selection and naming of the necessary settings for over 40
different products. The operator may then call up the settings by simply
selecting the assigned IntelliSet name.
For example, a load of apples may require continuous operation at 35°F
(1.7°C) with a defrost every three hours and a load of cheese may require
the same operation with setpoints ranging from 35°F to 42°F (1.7°C to
5.6°C), while a load of ice cream may require start-stop operation at -22°F
(-30°C) with defrost at 12-hour intervals. The settings required for each
product may be entered into the system and locked so that they cannot be
changed, and they can be given an appropriate name. In the case of
cheese, the range of setpoints may be locked, leaving the operator the
ability to change the setpoint within the locked range.
When a load of apples is going to be picked up, the operator simply
selects “APPLES” from the IntelliSet menu. For cheese, “CHEESE” is
selected and the setpoint reset as required. For ice cream, “ICE CREAM”
is selected. With each selection, the system automatically re-programs the
settings to provide the best temperature control, fuel economy, and
performance for that particular product.
An IntelliSet may be pre-programmed as “IntelliSleep” which allows Sleep
mode to be entered by simply changing to that IntelliSet. Range Protect
may be applied to any IntelliSet. Range Protect offers increased fuel
savings over normal Start-Stop Operation for commodities that can use
less restrictive temperature control.
1. With the system powered up (START/RUN-OFF switch in the START/
RUN position) and the default screen displayed, press the “=” key.
2. Press the MENU key until INTELLISET is displayed. Then, press the
INTELLISET soft key to display the IntelliSet screen.
To Next Page
Loading...
Need help?
General