62-11648 14
7.4 Electric to Engine
1. Press and release the MENU key until the STANDBY soft key is displayed.
2. Press the STANDBY soft key, the STANDBY and DIESEL soft keys will
display.
WARNING
!
Under no circumstances should ether or any other starting
aids be used to start the engine.
3. Press the DIESEL soft key to place the unit in Engine Operation. The unit
will stop, the status bar will change to DIESEL and the unit will restart in
Engine Operation.
4. If the standby electric cable is in place, and will not be needed, ensure the
external power circuit breaker is OFF, disconnect the cable from the unit
receptacle and hang up off the ground.
NOTE
Units equipped with the auto switching feature will have STDBY/
AUTO displayed in the upper right hand corner of the display.
START/STOP ELECTRIC
BOX
SETPOINT
o
F
TEMP
-9.9
COOL
-10
28.1 36.2
28
COOL COOL
36
START/STOP DIESEL
BOX
SETPOINT
o
F
TEMP
-9.9
COOL
-10
28.1 36.2
28
COOL COOL
36
LANGUAGE
DATA
RECORDER
STANDBY
STANDBY
DIESEL
EXIT
3
4
To Next Page
Loading...
Need help?
General