Carrier TRANSICOLD Vector 8600MT - Language Setting; Changing Display Language

62-11648 32
16. Language Selection
NOTE
Language selection may not be available on early software revisions.
1. With the system powered up (START/RUN-OFF switch in the START/
RUN position) press the MENU key until LANGUAGE/VIEW is displayed.
2. Press the LANGUAGE/VIEW soft key to display the LANGUAGE screen.
3. The LANGUAGE screen will display with a 10-second timeout. Press the
▲ or ▼ key to scroll through the available selections.
4. With the desired language highlighted, press the “=” key. The highlighted
language will become active and “LANGUAGE CHANGED” will be
displayed.
1
2
START/STOP DIESEL
Viewing Menu Soft Key
LANGUAGE/
DATA
EXIT
Selections
Press Menu Key to Scroll
RECORDER
VIEW
LANGUAGE
ENGLISH
BACK
EXIT
ESPANO
ENGLISH
SPANISH