33 62-11648
17. Unit Data
1. With the system powered up (START/RUN-OFF switch in the START/
RUN position), press the MENU key until UNIT DATA is displayed.
2. Press the UNIT DATA soft key to display the unit data screen.
3. The Unit Data screen will display with a 15-second timeout. Press the ▲ or
▼ key to scroll through the available unit data sub menus. With the desired
sub-menu highlighted, press the “=” key to view the data.
1
2
START/STOP DIESEL
Viewing Menu Soft Key
INTELLISET
PRETRIP
HOUR
METERS
UNIT
DATA
Selections
Press Menu Key to Scroll
UNIT DATA
BACK
EXIT
UNIT DATA LISTING
END OF LIST
ENGINE
REFRIGERATION C1 SENSORS
REFRIGERATION SYSTEM MENU
REFRIGERATION C2 SENSORS
To Next Page
Loading...