62-11648 28
14. Data Recorder / Trip Start
The Data Recorder records data while the START/RUN - OFF switch is in the
START/RUN position.
1. With the system powered up (START/RUN-OFF switch in the START/
RUN position), press the MENU key until DATA RECORDER is displayed.
2. Press the DATA RECORDER soft key to display the sub menus.
3. The Data Recorder screen will display with a 15-second timeout. Press the
▲ or ▼ key to scroll through the available sub menus. With the desired
sub-menu highlighted, press the “=” key to enter the menu.
1
2
START/STOP DIESEL
Viewing Menu Soft Key
LANGUAGE
DATA
EXIT
Selections
Press Menu Key to Scroll
RECORDER
DATA RECORDER (1 of 5)
MARK TRIP START
BACK
EXIT
PRINT TO SCREEN
PRINT TO PRINTER
SCREEN SETUP
PRINTER SETUP
Choices vary based
and model type.
on software revision
To Next Page
Loading...