Caution: Turn off the power switch before connecting or disconnecting the connector. Failure to do so could damage
the board.
NOTES:
6. Model 38VMA***HDS5-1 (208/230V-3Ph-60Hz):
L1 Error will be reported when it is lower than 150VDC, the under-voltage setting value for DC bus.
7. Model 38VMA***HDS6-1 (460V-3Ph-60Hz):
L1 Error will be reported when it is lower than 400VDC, the under-voltage setting value for DC bus.
71
To Next Page
Loading...
