Carrier 59TN6A - Horizontal Left-Right Vent Configuration Diagram

AI 1327
HORIZONTAL LEFT -
VERTICAL VENT CONFIGURATION
I
A11328
HORIZONTAL LEFT -
LEFT VENT CONFIGURATION
HORIZONTALLEFT-
RIGHT VENT CONFIGURATION*
*RequiresAccessoryInternalVent Kit
SeeProductDatafor CurrentKitNumber
Al1329
(_ Attach vent pipe adapter with gasket to furnace casing.
(_) Align notches in rubber coupling over standoffs on adapter. Slide clamps over the coupling.
Q Slide vent pipe through adapter and coupling into vent elbow.
(_ Insert vent pipe into vent elbow.
C) Torque all clamps 15 lb.-in.
(_ Attach combustion air pipe adapter with gasket to furnace.
(_) Attach combustion air pipe to adapter with silicone. Pilot drill a 1/8-in.
hole in adapter and secure with a #7 x 1/2-in sheet metal screw.
Fig. 41 - Horizontal Left (Appearance may vary)
A11340
53