ComfortVu™ BACnet Thermostat Plus Model TBPL-H (Line voltage)Carrier Proprietary and Confidential CARRIER CORPORATION ©2020
Installation and Operation Guide All rights reserved
8
Turning the thermostat ON and OFF
• Press the button to turn the unit ON. System mode and fan
speed symbols will appear on display.
• Press again to turn the unit OFF. The symbols will disappear.
Unit OFF
Unit ON
Selecting temperature scale
Press and hold the button to switch between temperature
scales.
The set-point must be different than 10, 11ºC / 50, 51, 52ºF.
Adjusting the Setpoint temperature
: The setpoint must be different than 10, 11ºC/50, 52ºF.
In One setpoint configuration:
1 Press the ▲or ▼buttons once to view the setpoint
temperature.
2 Press again to adjust the setpoint.