Carrier CRECOMZR052A00 - Page 6

6
Fig. 8 — Blower Housing
Fig. 9 — End View of Unit
Fig. 10 — Hood Assembly and Hood Part Identification/Seal Strip Application Areas
Rotation
HVAC
Harness
Indoor-fan
SAT
Provided
Upper Panel
Economizer
Outside Air
Damper
Provided
Bottom Panel
With Relief
Relief Damper
Remove
Shipping
Screw
Insert two (2) screws through the
panel and into the economizer
Apply seal strip
to the front of
this flange
Apply seal strip
to the back
of this flange
Apply seal strip
to the back
of this flange
Apply seal strip
to the back
of this flange
7
7
3
5
6
8
8
2
8
6
4
2
1
2
ITEM # DESCRIPTION QTY
1 Filter Supports 3
2 Central Retainer 3
3 Hood Top 1
4 Left Hood Side 1
5 Right Hood Side 1
6 Side Retainer 2
7 Top Diverters 2
8 Deflector 3