5.1.2 Control Unit Faults
In the case of a fault with a Control Unit the indications are:
Detector No fault indication.
Control Unit Activation of the Fault Relay
Control Unit with membrane Fault indicator on flashing
Remote Display Unit Displays the Engine Overview Screen with the engine name
button, under the bar graph, of the engine in fault displayed
in blue.
Further details on the type of fault indicated can be obtained by either:
1. Examining the engine status, see section 3.4
2. Examining the event-log, see section 3.6
5.1.3 Remote Display Unit Communication Faults
In the case of a communications fault between the Remote Display Unit and a Control Unit the
indications are:
Detector No fault indication.
Control Unit No fault indication
Remote Display Unit Displays the Engine Overview Screen with a cross in the
engine bar graph, of the engine.
Figure 149 Remote Display Unit Communication Fault
To Next Page
Loading...
