Carrier GRAVINER Mk 7 - Detector Cables; Figure 12 Detector Cable

March 2021 Page 17 of 143 59812-K007 Rev 17
Business Confidential
2.4 DETECTOR CABLES
Each detector must be connected to the Control Unit by way of a supplied detector cable.
Refer Figure 12.
Ensure that the cables are run in a suitable cable tray and clipped at regular intervals to ensure they
cannot be subjected to mechanical damage caused by vibration.
Figure 12 Detector Cable
Refer to section 6.6 for a list of available detector cables
All Detector connectors are pre-wired.