Carrier GRAVINER Mk 7 - Figure 26 Control Unit Relay Cable Assembly; Figure 27 Detector Cable Assembly

March 2021 Page 29 of 143 59812-K007 Rev 17
Business Confidential
Figure 26 Control unit relay cable assembly
Feed the cable into the control unit via a metal IP65 EMC gland supplied, ensuring that the metal prongs
make a good contact with the exposed cable screen as shown.
2.7.3 Control Unit to Detector Connections
At the Detector, screw the connector to the top of the Detector.
Figure 27 Detector cable assembly
At the Control Unit, screw the connector to the input required.