Carrier GRAVINER Mk 7 - Installation and Commissioning; Control Unit Mounting; Figure 6 Control Unit 1-53836-K270 (with Membrane)

March 2021 Page 10 of 143 59812-K007 Rev 17
Business Confidential
2
2.1 CONTROL UNIT MOUNTING
The Control Unit 1-53836-K270 (1-53836-K270-01 Caterpillar only) or 1-53836-K276 is designed for on-
engine mounting and it is recommended that the Control Unit is installed as near to the centre of the
engine as possible to minimise detector cable lengths.
Mounting is via the four M6 locating holes in the box. Enough space must be left around the Control Unit
to allow access to the cable glands and the routing of the cables and to facilitate easy access to all
aspects of the Control Unit.
Figure 6 Control Unit 1-53836-K270 (With Membrane)
(Caterpillar 1-53836-K270-01)