Figure 80 Detecting Engines
The display should indicate the correct number of engines have been found and a bar graph displayed
for each.
The number shown in the bottom right of the display indicates the Remote Display Unit software number
and version.
3.1.4 Engine Overview
During normal operation the Remote Display Unit will display the Engine Overview screen showing a bar
graph for each engine.
Figure 81 Engine Overview Screen User Level
The name of the engine is shown above the bar graph and in the button below the bar graph.
The level displayed on the bar graph and numerically below the bar graph indicates the highest oil mist
level being measured by one of the detectors on that engine at that moment in time. The indicated level
will change real time as the oil mist level in the engine changes.
Colour coding of the bar graph indicates the alarm state of the engine:
Green No alarm condition
Orange Pre-Alarm
Red Slowdown/Shutdown Alarm
A fault on an engine is indicated by a blue engine button
An isolation on the engine is indicated by the numerical level being replaced by ISO.
To Next Page
Loading...
