Carrier SmartView - Header Buttons Navigation

4.5 - Header buttons
Home Main MenuPrevious screen System Menu
User Login
Start / Stop Alarms Menu
Button Description
Home screen: Press the button to go to the Home screen.
Previous screen: Press the button to go back to the previous screen.
Main menu: Press the button to go to the Main menu.
System menu: Press the button to go to the System menu.
User Login menu: Used to login in to the controller in order to access higher conguration level.
User is not logged in. Service technician access level.
User access level. Factory access level.
Start/Stop menu: Used to control the unit control mode.
Unit is currently stopped (blue icon).
Unit is currently running (green icon).
Alarm menu: Press the button to go to the Alarms menu.
The grey bell means there is currently no alarm active on the unit.
The yellow ringing bell means that there is a partial alarm (one circuit affected by the alarm) or Alert (no action
taken on the unit).
The red ringing bell means that the unit is affected by the alarm.
4.6 - Subheader buttons
Button Description
A
Circuit view: Press the button to go to the circuit view.
A
Green lights in the corners of the circuit icon mean the circuit is currently running.
A
Grey lights in the corners of the circuit icon mean the circuit is currently stopped.
* Please note that the letter inside the circuit icon stands for the circuit, i.e. "A" stands for circuit A, "B" stands for circuit B.
** Please note that the subheader buttons are only displayed from a PC browser.
4 - SMARTVIEW USER INTERFACE
11