Carrier SmartView - Schedule Menu; Holiday Menu

5.3 - Schedule menu
The Schedule menu includes two time schedules, where the rst
one (OCCPC01S) is used to control the unit start/stop and the
second one (OCCPC02S) is used to control the dual setpoint.
Schedule Menu – SCHEDULE
Icon Name Displayed text* Description
OCCPC01S
OCCPC01S
- Schedule Menu
Unit on/off time
schedule
OCCPC02S
OCCPC02S
- Schedule Menu
Unit setpoint selection
time schedule
*Depends on the selected language (English by default).
Example: Setting occupancy schedule
IMPORTANT: For more information about schedule setting,
please see section 6.24.
5 - SMARTVIEW CONTROL: MENU STRUCTURE
5.4 - Holiday menu
The Holiday menu allows the user to set up to 16 holiday periods,
which are dened by the start month, start day, and duration.
Holiday Menu – HOLIDAY
Icon Name Displayed text* Description
HOLDY_01
HOLIDAY
- HOLDY_01
Holiday period No.1
settings
...
... ...
HOLDY_16
HOLIDAY
- HOLDY_16
Holiday period No.16
settings
*Depends on the selected language (English by default).
HOLIDAY - HOLDY_01 (...)
No. Name Status Default Displayed text* Description
1 HOL_MON 0-12 0 Holiday Start
Month
Holiday start month
2 HOL_DAY 0-31 0 Start Day Holiday start day
3 HOL_LEN 0-99 0 Duration (days) Holiday duration
(days)
*Depends on the selected language (English by default).
IMPORTANT: For more information about holiday setting,
please see section 6.25.
5.5 - Network menu
The Network menu allows the user to change network setting for
Modbus and dene e-mail accounts used for alarm notications
(see section 8.3).
Network Menu – NETWORK
Icon Name Displayed text* Description
EMAILCFG Email Conguration Email settings
MODBUSRS ModbusRTU Cong.
Modbus RTU
conguration
MODBUSIP ModbusTCP/IP Cong.
Modbus TCP/IP
conguration
BACnet BACnet Conguration
BACnet
conguration
*Depends on the selected language (English by default).
26