Carrier SmartView - Start; Stop Menu

5.8 - Start / Stop menu
Home Main MenuPrevious screen System Menu
User Login
Start / Stop Alarms Menu
5.8.1 - Unit operating mode
With the unit in the Local off mode: To display the list of
operating modes and select the required mode, press the Start/
Stop button in the upper-right corner of the Synoptic screen.
IMPORTANT: When entering the menu, please note that the
currently selected item corresponds to the last running
operating mode.
Unit start/stop screen (operating modes)
Local On
Local On: The unit is in the local control mode and
allowed to start.
Local Schedule
Local Schedule: The unit is in the local control mode
and allowed to start if the period is occupied.
Network
Network: The unit is controlled by network commands
and allowed to start if the period is occupied.
Remote
Remote: The unit is controlled by external commands
and allowed to start if the period is occupied.
Master
Master: The unit operates as the master in the master/
slave assembly and it is allowed to start if the period
is occupied.
5.8.2 - Unit start
To start the unit
1. Press the Start/Stop button.
2. Select the required Machine Mode.
• Local On
• Local Schedule
• Network
• Remote
• Master (Master button is displayed if Master/Slave Enable)
3. The Home screen will be displayed.
5.8.3 - Unit stop
To stop the unit
1. Press the Start/Stop button.
2. Conrm the unit shutdown by pressing Conrm Stop or cancel
the unit shutdown by pressing the Back button.
5 - SMARTVIEW CONTROL: MENU STRUCTURE
33