Carrier SmartView - 7 - WEB CONNECTION; SmartView Web Interface Access; Technical Documentation Access

7.1 - Web interface
The SmartView control provides the functionality to access and
control unit parameters from a web interface. To connect to the
controller via the web interface, it is necessary to know the IP
address of the unit.
To verify unit IP address:
1. Go to the System menu.
2. Select Network (NETWORK).
3. Verify TCP/IP Address for “IP Network Interface J5 (eth0)”.
See also section 3.3.
■ Unit default address:
169.254.1.1 (J15, eth0)
■ The unit IP address can be changed.
To access SmartView web interface:
1. Open the web browser.
2. Enter the IP address of the unit in the address bar of the web
browser. Start with https:// followed by the unit IP address.
Example: https://169.254.1.1
3. Press Enter.
4. The web interface will be loaded.
IMPORTANT: Three users can be connected simultaneously
with no priority between them. The last modication is always
taken into account.
Minimum web browser conguration:
■ Internet Explorer (version 11 or higher)
■ Mozilla Firefox (version 60 or higher)
■ Google Chrome (version 65 or higher)
For security reasons the unit cannot be started / stopped via the
web interface. All other operations, including monitoring unit
parameters or unit conguration, can be performed via the web
browser interface.
Make sure that your network is protected from malicious
attacks and any other security threats. Do not provide open
access without proper network security safeguards.
Carrier does not hold any responsibility or liability for
damage caused by security breach.
7.2 - Technical documentation
When using the SmartView control via a PC web browser, you
may easily access all technical documents related to the product
and its components.
Once you connect to the SmartView control, click the Technical
documentation button in order to see a list of documents
related to the unit.
Technical documentation includes the following documents:
■ Spare parts documentation: The list of spare parts included in
the unit with reference, description and drafting.
■ Misc: Documents such as electrical plans, dimension plans,
unit certicates.
■ PED: Pressure Equipment Directive.
■ IOM: Installation operation and maintenance manual, controls
installation/maintenance manual.
Click the Help button to get access to BACnet user guide,
Modbus user guide and Open Source Licenses used by
SmartView.
IMPORTANT: Please save all data (documents, drawings,
diagrams, etc.), for example, on your computer. If the display
is replaced, all documents will be lost. Make sure that all
documents are stored and may be accessed at any time.
7 - WEB CONNECTION
48