Carrier SmartView - User Login Menu

5.7 - User Login menu
Home Main MenuPrevious screen System Menu
User Login
Start / Stop Alarms Menu
User Login menu
User Login Service Login Factory Login
Basic access (no password)
User password required
Legend:
5.7.1 - Access control
■ User Login menu provides access to three different access
levels, i.e. user conguration, service conguration, and factory
conguration.
■ Multilevel security ensures that only authorised users are
allowed to modify critical unit parameters.
■ Only people qualied to manage the unit should be familiarized
with the password.
■ Conguration menu can be accessed only by logged-in users
(user conguration level or higher).
IMPORTANT: It is strongly recommended to change the
default password of the user interface to exclude the possibility
of changing any parameters by an unqualied person.
5.7.2 - User login
Only logged-in users can access congurable unit parameters.
By default, user password is “11”.
To log in
1. Press the User Login button, and then select User Login.
2. Press the Password box.
3. Provide the password (11) and press the Conrm button.
4. The User Login screen appears.
5.7.3 - User password
User password can be modied in the User Login menu.
To change your password
1. Press the User Login button, and then select User Login.
2. Press the Change User Password button.
3. The Change User Password screen will be displayed.
4. Please provide the current password, and then type the new
password twice.
5. Press the Save button to conrm password update or the
Cancel button to exit the screen without making modications.
5.7.4 - Service & Factory login
Service and factory login menus are dedicated to Carrier service
technicians and factory line. To learn more about advanced access
control, please refer to the Control Service Guide (service
technicians only).
5 - SMARTVIEW CONTROL: MENU STRUCTURE
32