Carrier SmartVu - Start;Stop Menu

28
5 - SMARTVU CONTROL: MENU STRUCTURE
5.5 - System menu
Legend:
The System menu allows the user to verify software, hardware,
or network information and change some display settings, including
language, date/time, or brigtness.
■ To access the System menu, press the System menu button
located in the upper-right part of the Home screen.
CAUTION: Since specific units may not include
additional features, some tables may contain
parameters that cannot be configured for a given
unit .
CPU Load Menu – CPULOAD
Status
Default
Unit
Displayed text*
Description
0 to 100
-
%
CPU load
CPU utilization
0 to 100
-
%
RAM Memory utilization
RAM usage
0 to 100
-
%
FLASH Memory utilization
Flash memory usage
*Depends on the selected language (English by default).
EOL Resistor Menu – EOLRES
Status
Default
Displayed text*
Description
disable/enable
disable
End of Line Res. J6(LEN)
End of line resistor J6 (LEN bus)
disable/enable
disable
End of Line Res. J7(CCN)
End of line resistor J7 (CCN bus)
disable/enable
disable
End of Line Resistor J8
End of line resistor J8
disable/enable
disable
End of Line Resistor J10
End of line resistor J10 (Modbus)
*Depends on the selected language (English by default).
Home
Previous screen
Main Menu
System Menu
User Login
Start / Stop
Alarms Menu
System menu
Hardware Info
Software Info
Brightness
Language & Unit
System
Date/Time
Configuration
Network
EOL Resistor
CPU Load
Basic access (no password)
User password required