5.6 - User Login menu
Legend:
5.6.1 - Access control
■
User Login menu provides access to three different access
levels, i.e. user configuration, service configuration, and factory
configuration.
■
Multilevel security ensures that only authorised users are
allowed to modify critical unit parameters.
■
Only people qualified to manage the unit should be familiarized
with the password.
■
Configuration menu can be accessed only by logged-in users
(user configuration level or higher).
IMPORTANT: It is strongly recommended to change the
default password of the user interface to exclude the
possibility of changing any parameters by an
unqualified person.
5.6.2
-
User login
Only logged-in users can access configurable unit parameters.
By default, user password is “11”.
To log in
1.
Press the
User Login
button, and then select User Login.
2.
Press the Password box.
3.
Provide the password (11) and press the
Confirm
button.
4.
The User Login screen appears.
5.6.3 - User password
User password can be modified in the User Login menu.
To change your password
1.
Press the
User Login
button, and then select User Login.
2.
Press the
Change User Password
button.
3.
The
Change User Password
screen will be displayed.
4.
Please provide the current password, and then type the new
password twice.
5.
Press the
Save
button to confirm password update or the
Cancel button to exit the screen without making modifications.
5.6.4 - Service & Factory login
Service and factory login menus are dedicated to Carrier service
technicians and factory line. To learn more about advanced access
control, please refer to the Control Service Guide (service
technicians only).
To Next Page
Loading...
